Provides Advanced Wear Protection
Excellent wear management and protection for essential engine components like pistons and camshafts are provided with AMSOIL 5W30 OE Synthetic Motor Oil.
Smaller displacement engines, which frequently use oil with a lower viscosity, produce harsh conditions, making this extra protection all the more critical.
Poor valve timing caused by camshaft wear can significantly reduce engine performance and necessitate costly repairs.
Tests like Peugeot TU3M Wear (CEC L-38-A-94) establish whether or not an oil can limit wear in accordance with the GM* dexos1® Gen 2 specification.
An four cylinder engine was put to 100 hours of intense, wear-inducing stress.
In comparison to the GM dexos1 Gen 2 specification, AMSOIL 5W30 OE Motor Oil provides 47 percent higher wear protection1.
Pistons are protected from low-speed pre-ignition.
The chemistry of OE Synthetic Motor Oil has been proved to safeguard your engine from the detrimental effects of low-speed pre-ignition (LSPI). The spontaneous ignition of the fuel/air mixture before spark-triggered ignition is known as LSPI. The majority of new engines use gasoline direct injection (GDI), which is frequently combined with a turbocharger. LSPI incidents, which can ruin pistons and connecting rods, are more likely as a result of these technologies. Protecting your engine from LSPI requires the use of a correctly designed motor oil.
Original equipment manufacturers (OEMs) such as General Motors (GM) have addressed the problem by developing tests to determine the effectiveness of a motor oil to prevent LSPI. In the engine test required by the GM dexos1 Gen 2 specification, OE Synthetic Motor Oil provided 100 percent protection against LSPI2– zero incidences were documented over the course of five tests.
Engines are kept clean.
The chemical structure of OE Synthetic Motor Oil is 100 percent synthetic and pure, and it is designed to remove dangerous impurities. Its synthetic base oils are chemically resistant, which helps to prevent deposits. OE has strong sludge and deposit fighting properties thanks to its detergent and dispersion ingredients. OE Synthetic Motor Oil keeps your engine clean, dependable, and performing at its best.
All Temperatures are Protected
OE Synthetic Motor Oil is appropriate for today's hot running engines thanks to synthetic base oils and a sophisticated additive package. It effectively combats heat to avoid thickening, regulate deposits, and reduce oil consumption. The homogeneous structure of OE keeps it fluid in cold temperatures, allowing for easier cold starts and faster lubrication of components, reducing start-up wear.
Increases fuel efficiency while maintaining low emissions
The American Petroleum Institute (API) has certified OE Synthetic Motor Oil to meet and exceed the specifications specified in most owner's manuals. It performs well in fuel economy testing, gaining the API's "Resource Conserving" classification. OE is also supportive of new emissions-control systems, advocating correct catalytic converter functioning for long service life and low emissions.
1 According to the dexos1 Gen 2 specification, independent testing of OE 0W-20 in the Peugeot TU3M Wear Test.
2 Based on zero LSPI incidents in the LSPI engine test required by the GM dexos1 Gen 2 specification in five consecutive testing of AMSOIL 5W-30 Motor Oil.
*All trademarked names are the property of their respective owners and, in some countries, may be registered trademarks. Their usage makes no claim of association or sponsorship, express or implicit.
In applications that require any of the following standards, use AMSOIL OE Synthetic Motor Oil:
ACEA A1/B1,A5/B5; Chrysler MS-6395; Ford WSS-M2C946-A, WSS-M2C929-A; ILSAC GF-5, GF-4...; GM dexos1 Gen 2 (supersedes LL-A-025, 6094M, and 4718M); GM dexos1 Gen 2 (supersedes LL-A-025, 6094M, and 4718M
Other synthetic and traditional motor oils are compatible with AMSOIL OE Synthetic Motor Oil. Adding alternative oils, on the other hand, will limit the life of AMSOIL motor oils as well as their performance benefits. Where oils have been combined, AMSOIL does not recommend extended drain intervals.
AMSOIL OE Synthetic Motor Oil is not compatible with aftermarket oil additives.
Between the hours of 8 a.m. and 5 p.m. Central time, call (715) 399-TECH (8324) or email firstname.lastname@example.org for rapid answers to your technical concerns.
LIFE IN SERVICE
AMSOIL OE Synthetic Motor Oil is suggested for gasoline-fueled cars at the intervals specified by the vehicle manufacturer or indicated by the oil life monitoring system. At each oil change, replace the oil filter.