Amsoil Authorized Dealer
AMSOIL Authorized Dealer
Product/Account Links
AMSOIL Accounts
AMSOIL Motor Oil
AMSOIL Other Products
Other Products
AMSOIL 25W-40 Synthetic Blend Marine Engine Oil
AMSOIL 25W-40 Synthetic Blend Marine Engine Oil
AMSOIL 10W-40 Synthetic Marine Engine Oil
AMSOIL 10W-40 Synthetic Marine Engine Oil
AMSOIL 10W-30 Synthetic Marine Engine Oil
AMSOIL 10W-30 Synthetic Marine Engine Oil
AMSOIL Outboard 100:1 Pre-Mix Synthetic 2-Stroke Oil
AMSOIL Outboard 100:1 Pre-Mix Synthetic 2-Stroke Oil
AMSOIL DOMINATOR® SAE 60 Racing Oil
AMSOIL DOMINATOR® SAE 60 Racing Oil
Save up to 25% on Amsoil Products

AMSOIL HP Marine Synthetic 2-Stroke Oil

AMSOIL HP Marine Synthetic 2-Stroke Oil
AMSOIL HP Marine Synthetic 2-Stroke Oil
Product Highlight
Excellent for Evinrude® E-TEC™ factory-lean setting (replaces Evinrude XD100™ 2-Cycle Oil). Helps prevent deposits, protects against wear, has low smoke, protects against rust and has low aquatic toxicity. Superior performance as an injection oil or at 50:1 pre-mix.
Product Description
High-quality motor oil is critical for maximum performance in modern two-stroke marine motors. Direct fuel injection (DFI) improves combustion efficiency, delivering the extra power enthusiasts want, while leaner gas-to-oil ratios provide the reduced exhaust emissions the government mandates. The leaner ratio leaves less oil to lubricate and protect these hotter, more powerful motors, which invites deposits and wear that threaten engine performance and life. HP Marine is proven to excel in these harsh conditions. It controls performance-robbing friction, heat and wear, yet produces low smoke and has low aquatic toxicity properties. It's an oil as advanced as the engines it protects.

- Excellent for Evinrude® E-TEC™ factory-lean setting (replaces Evinrude XD100™ 2-Cycle Oil)
- Helps prevent deposits
- Protects against wear
- Low smoke
- Protects against rust
- Low aquatic toxicity
- Superior performance as an injection oil or at 50:1 pre-mix

Outstanding Wear Protection
The elevated heat and friction of modern two-stroke marine motors can exceed the film strength of inferior oils, increasing the likelihood of scuffing and wear. HP Marine's exclusive synthetic formulation provides increased lubricity for reduced wear during normal and lean-mix operation (see field study results). In 534 hours of field testing, HP Marine completely prevented piston skirt and cylinder bore scuffing, demonstrating its superior lubricity and ability to reduce friction between moving parts. It maintains a strong lubricating film even in lean-mix, severe-service conditions, helping marine engines achieve maximum life.

Excellent Deposit Control
HP Marine is formulated with MAXDOSE™, a system of advanced additives for "super-clean" operation. It helps prevent deposits that lead to poor performance. In field testing, HP Marine inhibited ring deposits that can cause ring sticking and ring jacking (carbon buildup behind the ring, forcing it outward), a phenomenon that occurs in modern DFI outboard motors. It also virtually eliminated exhaust port deposits for reliable, efficient operation.

Proven in Marine E-TEC Field Study
HP Marine was installed in a 250-hp Evinrude E-TEC engine powering a heavy-duty marine rescue vessel. Following a 28-hour break-in period at the normal oil setting, the engine was programmed to its factory-lean setting and operated for 506 hours prior to disassembly. An ASTM calibrated rater examined and awarded each component either a merit rating on a scale of 0 to 10 (with 10 representing no distress) or a percentage rating (with 0 percent representing no distress). Results prove HP Marine provided exceptional wear protection and deposit control.
Marine E-TEC Field Study Results
Marine E-TEC Field Study Results
APPLICATIONS
Use in two-stroke marine applications that specify TC-W3, including those made by: Johnson/Evinrude*, FICHT*, E-TEC*, Mercury* EFI & Optimax*, Yamaha*, Nissan*, Tohatsu* TLDI*, Suzuki*, Mariner*, Force*. Use as injection oil or 50:1 premix (2.6 oz. per U.S. gallon of gas).

Compatible with mineral and synthetic TC-W3-type two-stroke oils; however, mixing two-stroke oils should be minimized.
Product Size
Code Package Size Unit of Measure Product
HPMQT (HPMQT-EA) Quart Each HP Marine Synthetic 2-Stroke Oil
HPMQT (HPMQT-CA) Quart Case of 12 HP Marine Synthetic 2-Stroke Oil
HPM1G (HPM1G-EA) Quart Each HP Marine Synthetic 2-Stroke Oil
HPM1G (HPM1G-CA)
Quart
Case of 4 HP Marine Synthetic 2-Stroke Oil
HPM16 (HPM16-EA) 16-Gallon Keg Each HP Marine Synthetic 2-Stroke Oil
HPM30 (HPM30-EA) 30-Gallon Drum Each HP Marine Synthetic 2-Stroke Oil
HPM55 (HPM55-EA) 55-Gallon Drum Each HP Marine Synthetic 2-Stroke Oil
HPM27 (HPM27-EA) 275-Gallon Tote Each HP Marine Synthetic 2-Stroke Oil
Technical Information
Share with your social newtork
AUTHORIZED AMSOIL DEALER